Crash when running Baldur's Gate II on Win XP VM
iMac 2011 27", running Mac OS X 10.8.4, 20GB RAM. VM Running Windows XP, assigned 2GB of RAM and one processor core. I installed Baldur's Gate II, started it up, graphics were off-center (lower...
View ArticleRe: Use datastore cluster or RAID on a single host
Hey Matthew, RAID 1 for the production and a datastore on the 1TB for storing your templates etc. Pros:Templates you can easily rebuild and the 1TB does not need to be redundantThe Prod machines can be...
View ArticleRe: After RAID5 problems which are now solved, I am not able to mount VMFS
Before that you might have to run fdisk -d to delete the existing partition table! (This will not format the LUN though, just remove the partition) Rest of the command looks correct
View ArticleRe: After RAID5 problems which are now solved, I am not able to mount VMFS
If I use PartedUtil I see that its a 251 on line 1 which according to your post: VMware KB: Using the partedUtil command line utility on ESXi and ESX is a DataStore. That gives me some hope. /var/log...
View ArticleRe: After RAID5 problems which are now solved, I am not able to mount VMFS
What I still don't understand is what is going wrong here during the mount.1. We have a live physical disk.2. It shows formated and with a partition VMFS3.3. It shows itself under Configuration/Storage...
View ArticleRedraw problems with full-screen Baldur's Gate I on Windows XP
Another issue: Baldur's Gate I has redraw issues (pointer not redrawing correctly, severe blinking on parts of the screen) when run in full-screen mode. It seems to draw OK in windowed mode. iMac...
View ArticleRe: ESXi antivirus
Is there any antivirus that supports ESXi? Isn't Antivirus meant for the Guest OS's? If you sit and think about those two questions, the answer comes naturally - use any antivirus software that is...
View ArticleRe: no client side download is needed for this plugin
Hi there, I have the same problem here.Did you found a solution for this? In my lab I had used 2 vCenter (Version 5.1.0 Build 1064983) and 2 nodes (ESXi 5.1.0 Build 799733) for each vCentre My...
View ArticleRe: Serious USB 3.0 Issue on VMware Fusion 5
laughinman1 wrote It just clicked. Parallels must've built their own custom USB 3 driver for USB 3 HDDs to work with Parallels 8. That seems unlikely. More likely is that they have Windows 7 install a...
View ArticleRe: Site impact vCenter another location from ESXi Host..
As long as the required ports are open for VC to ESX communication and you do not have network latency and DNS etc is set up correctly (HA and VC operations depends on those three conditions) I don't...
View ArticleRe: Site impact vCenter another location from ESXi Host..
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1012382
View ArticleRe: Use datastore cluster or RAID on a single host
Sad face -- ESXi shows my controller to be: 82801HR/HO/HH (ICH8R/DO/DH). A little bit of research shows that ESXI probably won't see RAID volume made on this.
View ArticleRe: Use datastore cluster or RAID on a single host
I don't see this controller listed on the HCL as well! But you could install and check. I am running a Supermicro board with has no components listed on HCL and still works fine
View ArticleRe: vCenter Appliance Stops working
thanks a lot for the follow up this part is still pending To delete the VPX_SESSIONLOCK:Caution: Engage your Database Administrator for assistance if you are unsure of how to complete these...
View ArticleRe: The default sound device cannot be opened: A device ID has been used that...
Hi, I have host Windows 7 x64 HomeBasic and guest Ubuntu 12.04 LTS.The working method for me was to remove pulseaudio and use alsa for sound output:sudo apt-get autoremove pulseaudio sudo apt-get...
View ArticleRe: vCenter Appliance Stops working
Increasing the DB size is what needs to be done, really beyond that, just restarting the appliance and deleting off the session lock (if any) should help
View ArticleIs DELETE ALL really how you commit a snapshot?
Greetings, I'm running ESXI 5.1. I want to take the current state of my VM and make it the permanent state, removing all snapshots taken before. I believe this is called "Commit" according to VMware. I...
View ArticleMoving vCSA to new host??
Hello, I have a three host cluster being managed by a vCSA appliance that is running on one of the hosts. What is the best method to move the vCSA to a new host? Can the vCSA vmotion itself? Or...
View ArticleRe: vCenter Appliance Stops working
Well yes I already increased the size maybe restarting is what is left
View Article